Skip to content

A Village Inspires a New Modular Emergency Housing Concept

Nathan-Young-headshot_250x250
Nathan Young is the CEO and Principle Builder at Oregon-based MODS. MODS works with homebuyers, architects, developers and nonprofit organizations to create high-quality, sustainable buildings. In this article, he discusses his company's new idea for emergency and transitional housing.

Transitional housing is temporary accommodation for people transitioning from homelessness into permanent supportive housing. Typically, the goal is for residents to move into permanent housing in less than two years — but to have a stable roof over their heads and support services on site in the meantime. St. John’s Village is a transitional housing community that opened in early 2021 in Portland, Oregon. It consists of 19 individual sleeping pods in the style of tiny homes, each with a twin bed, electric heating and lighting, storage space, and its own locking front door. On the same site, there are also communal buildings that include showers, laundry facilities, a kitchen, a dining room, and offices for support staff.

MODS-exterior2_800x800
MODS-exterior_1200x800

St. John’s Village is a transitional housing community that opened in early 2021 in Portland, Oregon. It consists of 19 individual sleeping pods in the style of tiny homes.

The buildings were constructed by Portland-based modular manufacturing company, MODS PDX. Nathan Young, CEO and Principal Builder at MODS, says that he and his team learned a lot from this project. “It’s not cost-effective to build individual pods,” says Young. “These ones ended up in the range of $30,000 each, which is generally not affordable for non-profits and municipalities who want to build this kind of housing.”

As well as not being cost-effective, Young says it’s also not efficient to build individual pods. “For example, you have to install electrical infrastructure on each individual pod instead of installing one electrical panel that can serve three to six sleeping pods. My guys basically said they’d never build another one of those again,” Young says with a laugh.

Towards More Efficient and Cost-Effective Villages

So Young teamed up with design partner, Kegan Flanderka, Principal at Base Design + Architecture to brainstorm what worked well, and what could be improved upon for future emergency and transitional housing projects.

“We talked with service providers who run these types of communities and they really like the village concept, with pods that can be placed in different configurations depending on the site,” Flanderka says.

The partners also received feedback that the village concept is important to the residents themselves — who typically want to move away from apartment block structures that can feel institutional. “It’s hugely important for the residents to have their own front door, and to have easy access to the outdoors,” Flanderka says. He also suspects that small village-type communities are likely to meet with less neighborhood resistance than larger apartment buildings.

“So, we wanted to keep the flexibility of the village concept,” Flanderka says. “But along with that flexibility, we also wanted something that was more efficient to build than individual pods.”

MODS-interior1_600x338
MODS-interior2_600x338
MODS-interior3_600x338

In the St. Johns Village, office, bathroom, and kitchen modules all match the same platform as the sleeping pods. The modules can range in length from 24 feet to 48 feet.

Having modules that contain more than one pod means fewer exterior walls, fewer roofs, fewer electrical panels, and so on, thus reducing the amount of materials needed for the same square footage. “It’s also more efficient to transport and install one module that contains three sleeping pods than three individual sleeping pods,” Young adds. Three individual sleeping pods also take up more lot space than three pods of the same size inside one module — a more efficient use of the available land.

The Emergency Housing Concept

Based on the experience with St. John’s Village and the information they subsequently gathered, Flanderka and Young developed their Emergency Housing concept, which has a variety of different modules that can be built on the same platform. So a single module can consist of three, four, five, or six sleeping pods. Office, bathroom, and kitchen modules all match the same platform. The modules can range in length from 24 feet to 48 feet.

“So, the same basic module can contain sleeping pods, or bathrooms, or we can take out the walls and turn it into a communal kitchen or a community room. Or we can leave in the walls and make offices,” says Flanderka. “By combining different configurations of the modules, you essentially get that same village idea.”

The Oregon Home Builders Foundation (HBF) was one of the partners working on the St. John’s Village project. It’s a non-profit
organization that facilitates renovating and building housing for the homeless, and Young says the organization is enthusiastic about the Emergency Housing concept. “We’ve now built a prototype module containing three sleeping units and have showcased it at various events organized by the Portland Home Builders’ Association,” Young says. Despite the sometimes slowly turning bureaucratic cogs at municipalities and non-profits, interest has been increasing.

“In addition to the City of Portland reaching back out to us, we’ve had some interest from Clackamas County, Hood River, and some outlying areas that are looking into it for housing the homeless and also for wildfires and other emergencies,” Flanderka says.

The west coast of the United States has a large homeless population, and the partners envision their Emergency Housing being placed anywhere in the area they’re able to service — from Seattle to Los Angeles. And, because they’re built to standard building codes, permitting depends just on occupancy and how the jurisdiction wants to treat them, based on zoning and density. “They could be permitted as congregate living or as apartments. If they’re on trailers, they’re temporary structures and
don’t need to go through the typical permitting process. We can work with the needs of each jurisdiction to permit them and make them legal structures,” Flanderka says.

A Virtuous Circle

The Emergency Housing modules have been designed so they don’t require highly skilled labor to build them — which opens up employment opportunities for the future residents of the buildings.

“We learned from talking with service providers that 10% to 20% of homeless people would be capable of starting work fairly quickly if only they had a roof over their heads and an opportunity,” Young says. So he and Flanderka have been working with HBF on a workforce training program to try to integrate the Emergency Housing into that program.

Young says, “If the people who live in them can help build them for the next group of residents, that’s a really good virtuous circle.”

MODS-prototype_1000x563
MODS-prototype_1000x485
MODS-prototype2_1000x485

Computer renderings and finished prototypes of MODS’ emergency housing units.

About the Author: Zena Ryder is a freelance writer, specializing in writing about construction and for construction companies. You can find her at Zena, Freelance Writer or on LinkedIn.

More from Modular Advantage

The Key to Adaptable Smart Buildings is Less Construction, More Assembly

If owner/developers start by thinking offsite construction is simply traditional construction with a factory, they have it backwards. Here’s the correct way to start.

Ralph Tavares: Family, Business, and Beaches

Modular construction is growing in popularity because it offers several advantages over traditional construction. Here’s how it works.

Wilmot Modular: Always Willing to Help Out

Mike Wilmot, president of Wilmot Modular in Maryland, shares his experience responding to natural disasters and explains his company’s Rapid Response Program.

The Quick Response to Hurricane Katrina

Jane Conkin, owner of Quick Buildings Modular, recalls how her company provided much-needed modular buildings after Hurricane Katrina.

In Rough Times, Black Diamond Shines

Black Diamond CEO Trevor Haynes talks about the disasters his company has helped with and how disaster response is more than the “nuts and bolts” of transporting assets.

Mobile Hospitals: Lessons Learned During COVID

For this article, we caught up with
two modular manufacturers — one large, one small — who shared their experiences manufacturing mobile hospitals during the pandemic, and how those experiences have shaped
their ability to respond to future emergencies.

The Growth of Remote Virtual Inspections

Using the remote virtual inspection process, NTA inspectors can monitor a variety of MEP systems and other important procedures.

FRAMECAD: Innovating for Faster Construction and Better Built Environments

FRAMECAD® has spent the past 30 years developing, innovating, and refining its cold-formed steel (CFS) construction system.

B-CORE: The Modern Material from BROAD

BROAD’s B-CORE modular building material is composed of two stainless steel plates with a customizable array of stainless steel tubes fused between them. And the possibilities are endless.

Warming Up to Snowflake Manufacturing

It’s no simple matter to design a machine that will work for a specific manufacturer. But Brave Control Solutions has big ideas.